Combo Heat Press Machine Sublimation Printer 8 in1

This heat press machine 8in 1 has a large heat platen of 12″ x 15″ (38x30cm) providing a big surface to transfer onto flat surfaced items such as T-shirts, mugs, caps, ceramic plates, mouse pads, jigsaw puzzles and so on.
easy transition among cup, hat and plate heat press cushion; Through a spring and pressure-plate system, which allows weight to be more evenly distributed across the entire platen when it is closed
0- 260℃ temperature range, 0-999s timer control and countdown function, and the temperature e maintains constant once preset time is reached; integrated dual LED displays keep tracking set temperature and time, defending your safety with smart design; Fahrenheit & Celsius convertible, accommodating different users' needs
The swing arm can rotate completely 360 degrees, allowing the heating element to leave quickly, reducing the risk of accidental contact. The remote design makes it easy to adjust the required pressure depending on the transmission device, better control 1 press," TAG1> cap press, 1 size mug press, 4 printing machines. The complete bag helps you to easily apply transfers, letters, numbers and images on T-shirts, plates, ceramic tiles, mugs, beaches, mice, jigsaw puzzles, paper, the other misc.the pressure and improve the transfer effect.

Operation Steps:
1.Press the "SET" key for the first time, the indicator TEMP is on, press ▼ or ▲ (increase or decrease) to set the needed temperature.
2.Pressthe "SET"keyfor the second time, the indicatorTIME is on, Press ▼ or ▲ (increase or decrease) to setting the needed time. (Normally the time is 180 seconds for mugs and 15-20 seconds for t shirt printing)
3.Press "SET" for the third time, the machine enters the heating state, and the OUT indicator is on.When the temp reaches the set value, the OUT indicator flashes.
4. Press the "START" key,the machine starts to count down, the "TIME" indicator flashes. After thecountdown ends, the machine emitsa beep sound. Press the "STOP" key, and the machine enters the waiting state.

Partsreplacement :
1.) Mug Press Parts Change
1st Unplug the aviation plug，Then connect the mug press parts through the aviation plug, pay attention to the position of the connector when plugging and unplugging.
2nd If you want to replace other types of mug press, you only need to operate on the mug press parts, do not plug in or unplug the aviation plug.

2.) 5 and 6 inches press pad change
1stTakeoff the heating pad and Unplug the aviation plug.
2nd Connect the aviation plug and connect the 5 or 6 inches press pad with two screws.

Operational Advice:
1.Different products require different temperatures, times, and pressures. The first printing is recommended to be tested with small samples. After the test is successful, it is transferred in batches to avoid unnecessary waste.
2.Do not tear off the high temperature cloth on the machine.